How to build a personal computer?

It is not so difficult to build a personal computer. Professors, architects, engineers or students, housewives

all can do it. Having build the system you just have to follow these three main steps and prepare enough

equipment for installing . Remember to take case with power supply and the motherboard also comes with these

accessories.

Best of all we will place CPU with heat sink and cooler. The CPU can fit only one way. Having to remove

the cap from CPU. Make sure that prevent your hands from the pasta on the bottom. There are four holes to

place the pillars of the heat sink above these holes. Now press the four pillars down until you hear"click". Place

the cooler on top of the processor. Carefully when you support the board so you do not damage anything.

Secondary, let's install motherboard and Ram.After opening the case that the power supply is already

installed,use the plastic molding from the cooler.Keep screws together and find the screw holes on the

motherboard. Then organize the cables so you have enough place to easily fit the motherboard. After installing

motherboard, let's install the Ram. Place them correctly into the slots. If they fit, press the Ram chip down with

two hands. If placed correctly, the Ram is locked on both sides.

Finally, we will be doing is place the hardware. Before installing hardware, we need to place the DVD

writer and player. First, push the covers out where you are going to place the drivers. Now place them from

inside. And the DVD writer above. After that, screw them them and place the hard driver. Screw the hard driver

like we did with DVD player. Then place the video card into the slots. Finally, we will end up with a lot of cables

and wires. Organize them not get into the CPU fan.

In conclusion, building computer yourself is quite easy. You just need to follow three main steps above and

now you can start up your computer for the first time. I hope my direction could useful for all of you to build your

personal computer.